FFR SC1 Builders Series Kit for AMT 3rd Gen Camaro and Firebird Models

Ready to make your model move? The FFR SC1 Builders Series Chassis Kit is a great platform for many RC model car projects. With a front motor and live axle rear wheel drive layout, this chassis will look at home under your Camaro or Firebird body. Striking a nice balance of realism, value, and relative ease of assembly, this kit is ready for your next project! 

Important: Not all wheel options are kept stocked! Some are printed to order. Please allow us up to 3 business days for us to fulfill your order prior to shipping. You will receive an email once your order has been shipped. We appreciate your patience and understanding.    

Brass axle gears now available! An all metal gear drivetrain is optional when you choose to include brass gears from the selection above. Brass gears provide a highly durable drivetrain that will withstand far more abuse than the standard resin gears. Best suited for more performance oriented buyers, or beginners as brass gears are easier to install, and will not break or wear quickly due to poor alignment.     

Wheelbase: 102mm

Width (approx.): 70mm

Required components to complete you car (not included):

• Transmitter/Receiver
• 2S LiPo Battery with JST RCY plug/Charger
• Body

Learn more about this kit and how to assemble your chassis in this video:

We transformed this 1/25 scale AMT 1983 Camaro dealer promo car into a functioning RC model using this chassis: 

Using this chassis with MPC Pontiac Firebird model kit:

Please note this chassis is intended for experienced adult hobbyists only! Kit contains many small parts and requires a variety of tools to assemble. These may include but are not limited to; soldering iron, rotary tool, hobby knife, various drivers, pin vise hand drill, and side cutters. Please refer to the video above or contact us with questions. Chassis is designed to travel only at "scale speeds" and is not designed for jumping, bashing, crashing, drifting, outdoor use, or off-road use of any kind. Do not expose chassis to water, direct sunlight, or high temperatures. Keep chassis away from young children. Never store chassis with battery installed. Do not use chassis with metal bodies. Refer to our list of compatible models kits when choosing a body. We do not guarantee correct fit for any model kits not specifically listed. If you have questions, please contact us.     

Metal hop-up parts are available on Shapeways. Stronger chassis and drivetrain components may be necessary for certain builds. These parts are not manufactured by Make It RC, however can be ordered from our Shapeways store. Shimming the brass pinion gear may be necessary to align properly with the ring gear. M2 washers with a greater than 2mm inner diameter can be used. Contact us if you would like more information.          

Model kits that fit this chassis:

• AMT 1051 '83 Camaro Z28
• AMT/ERTL 31805 1983 Camaro Z/28
• AMT/ERTL 6561 1983 Camaro Z-28
• AMT/ERTL 6023 1991 Chevrolet Camaro Z-28
• AMT/ERTL 6157 Camaro Z28 Heritage Edition
• AMT/ERTL 6723 Camaro Z/28
• MPC 1-0814 Camaro Z 28
• MPC 1-0833 Camaro Indianapolis Pace Car
• Airfix 9 06436 Camaro Indianapolis Pace Car
• MPC 6308 Camaro Z28
• MPC/Ertl 6206 Chevrolet Camaro
• MPC/Ertl 6392 Chevrolet Camaro IROC-Z
• MPC 1-0808 Firebird
• MPC Q-0808 Firebird
• MPC 1-0832 Pontiac Firebird T-Roof
• MPC 1-0733 Firebird
• MPC 1-0783 Firebird
• MPC 6311 Firebird
• AMT/ERTL 6024 1991 Pontiac Firebird GTA
• AMT/ERTL 6158 Pontiac Firebird GTA
• AMT/ERTL 6932 20th Anniversary Turbo Firebird GTA
• AMT/ERTL 6269 Firebird GTA
• MPC 1-0675 Knight 2000 Knight Rider 
• MPC 806 Knight Industries Two Thousand Knight Rider

Other similar 1/25 scale 1982-1992 AMT and MPC Camaro and Firebird model kits and dealer promo cars may fit, however we can't confirm this. This chassis will not fit larger 1/24 scale Camaro and Firebird kits from Revell/Monogram. When in doubt measure the wheelbase and width of your body and compare to the measurements listed above. 

We may not have all replacement parts listed on our site, however replacement parts are available for all components. If you need a replacement part please simply contact us using this page. Be sure to leave your correct email address and let us know which parts you need. We are happy to assist.  

Make It RC LLC is not in any way associated with the listed model kit manufacturers or brands, including but not limited to Revell, AMT, MPC, and Round 2 Models. We are simply stating our product is compatible with a product(s) sold by specific brands. These other products (model kits) are not sold by Make It RC LLC, and therefore must be acquired elsewhere. Use of our product may void any warranties with the manufacturer of the compatible products (model kits) listed above, or make certain items ineligible for returns.