Hardware Kit for Make It RC CTC 01 Chassis

The hardware, axle shafts, bearings, springs, O-rings, and magnets needed to assemble the 3D printable Make It RC CTC 01 chassis. This kit only contains the hardware and select components needed to assemble the 3D printable chassis parts. Other components which are not included in this kit, such as the electronics and tires are necessary to make a functional chassis.     

CTC 01 Chassis STL files, information, and tutorials, can be found on our Patreon: https://www.patreon.com/collection/404019?view=condensed

Front and rear steel axle shafts must be cut to length. Glue or thread lock needed for M1.6 nuts.  

Included parts:

M3 Hardware

M3x40 Bolt

M3 Lock Nut

M2 Hardware

x2 M2x18 

x6 M2x16 

x5 M2x6

X9 M2 Lock Nut

M1.6 Hardware

x4 M1.6x16

x24 M1.6x8 

x24 M1.6x6

x2 M1.6x3 

x6 M1.6 Nut

x8    2x5x2mm Bearing 

M2 threaded rod for rear axles 

x4    3mm Springs

x10  4mm Rare Earth Magnets

x6    1.8mm O-Rings